3 inch (80mm) Twin wall flue Dinak DW

Adapter used to connect your boiler to twin wall flue. Requires a locking band.

Adapter used to connect your condensing boiler to twin wall flue. Requires a locking band.

Straight length pipe, 1000mm. (940mm effective length) Requires a locking band.

Straight length pipe, 500mm. (440mm effective length) Requires a locking band.

Straight length pipe, 330mm. (270mm effective length) Requires a locking band.

Telescopic adjustable pipe, 530mm - 350mm. Requires a locking band.

45 degree elbow allows for a 45 degree change in direction. Requires a locking band.

90 degree elbow allows for a 90 degree change in direction. Requires a locking band.

90 degree tee provides cleaning access at the base of the flue. Requires a locking band.

Tee cap is used to close off and provide cleaning access at the base of a tee. Requires a locking band.

Tee cap with drain is used to close off and provide a drain point at the base of the flue. Requires a locking band.

Locking band is used to connect two pieces together at the join.

Flat wall support is used to fix the chimney to the wall. Fix anywhere except on a joint.

Flat adjustable wall support is used to fix the chimney to the wall. Fix anywhere except on a joint.

Basic firestop plate is designed to provide the appropriate distance between the flue and any adjacent material.

Ventilated firestop must be used on solid fuel appliances where the flue passes through a combustible floor or ceiling.

Guy wire bracket is a special bracket to which guy wires are attached.

The Universal guy wire kit provides lateral support to the flue above the roof line. Guy wire bracket needed.

This flashing is used to provide a weatherproof seal where the flue passes through a tiled or slate roof.

This flashing is used to provide a weatherproof seal where the flue passes through a tiled or slate roof.

This flashing is used to provide a weatherproof seal where the flue passes through a tiled or slate roof.

This flashing is suitable for sheet metal profiled roofs, flat roofs, boats and caravans. Comes with fixing kit.

This flashing is suitable for sheet metal profiled roofs, flat roofs, boats and caravans. Comes with fixing kit.

Storm collar is used as extra protection above the flashing where the flue passes through the roof.

Rain cap is the final element of the vertical run and provides protection from the rain. Requires a locking band.

The weathering cap is the final element of the vertical run and provides protection from the wind and rain. Requires a locking band.

Horizontal terminal is the final element of the horizontal run. Requires a locking band.

A rubber seal used on condensing installations. 3 inch twin wall flue and 3 inch single wall flue.