152mm (6 inch) Twin wall flue SFL Sflue (Black)

Heat resistant touch up spray paint 400ml

Use to connect an appliance or stove pipe to the twin wall flue system.

Increases the appliance outlet size by one diameter. Use to connect an appliance or stove pipe to the twin wall flue system.

Short tapered adapter. Used to connect stove pipe to your twin wall flue.

Use to connect your twin wall flue directly onto your stove.

Designed to connect a flue liner to Sflue.Use this adapter where the flexible liner goes above the twin wall flue.

Straight pipe (effective length). Locking band included.

Straight pipe (effective length). Locking band included.

Straight pipe (effective length). Locking band included.

Straight pipe (effective length). Locking band included.

Allows for cleaning and inspection of the chimney system. Locking band included.

Straight pipe adjustable (effective length). Locking band included.

Straight pipe adjustable (effective length). Locking band included.

Straight pipe adjustable (effective length). Locking band included.

Locking band for use on all joints.

Locking band with micro toggle adjustment.

Provides added security on unsupported stacks up to 2.5m above the final support or wall band.

Allows for cleaning and inspection of the chimney system. Locking band included.

Allows for cleaning and inspection of the chimney system. Locking band included.

Provides cleaning point for the flue system.

Provides cleaning and drain point for the flue system.

15 deg elbow allows for a change in direction and can be combined to provide a chimney offset. Locking band included.

30 deg elbow allows for a change in direction and can be combined to provide a chimney offset. Locking band included.

45 deg elbow allows for a change in direction and can be combined to provide a chimney offset. Locking band included.

Provides location and dust stop where flue passes through non combustible floors.

Supports and firestops the chimney as it passes through the first combustible floor directly above the appliance. Load bearing.

Supports and firestops the chimney as it passes through the first combustible floor directly above the appliance. Load bearing.

Supports and firestops the chimney as it passes through a non combustible floor. Load bearing.

Used where the chimney passes through the upper combustible floors and where sections below the floor are enclosed within a non combustible shaft. Non load bearing.

Provides lateral support for the chimney.

Used to extend the wall band clearance up to 100mm.

Wall band heavy duty.

Short extension brackets. Total length 324mm. For use with heavy duty wall band.

Medium extension brackets. Total length 395mm. For use with heavy duty wall band.

Long extension brackets. Total length 600mm. For use with heavy duty wall band.

Wall support bracket (base support) supports the vertical load of the chimney when anchored to a suitable wall. Powder coated galvanised steel. Locking band included.

Designed to connect a flue liner to Sflue on a capped chimney within the attic space. Use this adapter where the flexible liner goes below the twin wall flue.

Roof support adjustable for Sflue Twinwall flue.

Guy wire bracket, use with wire to provide lateral stability above the roof line.

The Universal guy wire kit provides lateral support to the flue above the roof line. Guy wire bracket needed.

Roof brace kit provides lateral support to the flue above the roof line. No guy wire bracket needed.

Prevents rain ingress at top of chimney. Locking band included.

Prevents rain and bird ingress at top of chimney. Locking band included.

Provides protection from rain and wind at the top of the chimney. Locking band included.

Used at the top of a chimney if no rain guard is required. Locking band included.

Provides protection from rain and wind at the top of the flashing.

This flashing is used to provide a weatherproof seal where the flue passes through a tiled or slate roof.

This flashing is used to provide a weatherproof seal where the flue passes through a tiled or slate roof.

This flashing is used to provide a weatherproof seal where the flue passes through a tiled or slate roof.

Lead flashing, used to provide a weatherproof seal where the flue passes through a tiled or slate roof. Roof pitches from 0 to 45 degrees.

This flashing is suitable for sheet metal profiled roofs, flat roofs, boats and caravans. Comes with fixing kit.

This flashing is suitable for sheet metal profiled roofs, flat roofs, boats and caravans. Comes with fixing kit.

Select the pitch and pipe dimensions required. Lead slates are used wherever a pipe penetrates a roof, to form a weatherproof joint.

Select the pitch and pipe dimensions required. Lead slates are used wherever a pipe penetrates a roof, to form a weatherproof joint.

Select the pitch and pipe dimensions required. Lead slates are used wherever a pipe penetrates a roof, to form a weatherproof joint.

Provides clean finish where the chimney passes through an outside wall at 90 degrees.

Provides clean finish where the chimney passes through an outside wall at 45 degrees.

Provides clean finish where the chimney passes through a wall or ceiling.

Provides clean finish where the chimney passes through a wall or ceiling.

Provides clean finish where the chimney passes through a wall or ceiling.

Provides clean finish where the chimney passes through a wall or ceiling.

Provides clean finish where the chimney passes through a wall or ceiling.

Galvanised steel wall sleeve provides protections as flue passes through building structure.