Provides ventilation/extraction for residential and commerical situations including: kitchens, pizzerias, restaurants and pubs. Suitable for gas, oil and condensing applications.
Features of this flue.
Adapter to connect dinak single wall flue to a boiler
Adapter to connect dinak single wall flue to a condensing boiler
Straight length pipe, effective length 265mm
Straight length pipe, effective length 430mm
Straight length pipe, effective length 930mm
Adjustable pipe can be cut to length required from 65 to 206mm
Adjustable pipe can be cut to length required from 65 to 373mm
Temperature length
Elbow allows for a change in direction of the flue run
Elbow allows for a change in direction of the flue run
Elbow allows for a change in direction of the flue run
Elbow allows for a change in direction of the flue run
Elbow allows for a change in direction of the flue run
Inspection elbow 87 degree
Inspection elbow 90 degree
Tee provides cleaning access at the base of the flue
Tee 135 degree. For natural draft and dry applications
Tee 135 degree. For condensing and overpressure applications
Tee provides cleaning access at the base of the flue
Soot collector, closes off the flue and provides cleaning access at the base of a tee.
Soot collector with drain, closes off the flue for cleaning access at the base of a tee and provides a drain point for any moisture collected.
Standard joint clamp for use in dry, non condensing applications
Joint clamp for use in condensing applications - comes with seal.
Wall support provides lateral stability for the chimney
Adjustable wall support provides lateral stability for the chimney.
Allows for distance adjustment from 70-120mm from the wall surface
This guy wire bracket can be Used to stabilise the flue where wall brackets would not be suitable, requires guy wire pack (separate item)
Storm collar, provides extra protection above the flashing where the flue passes through the roof and protects rubber flashings from extreme weather conditions
Rain cap is the final element of the vertical run and provides protection from the rain
The weathering cap is the final element of the vertical run and provides protection from both wind and rain
Open terminal is the final element of the vertical run helps prevent wind affecting the draught in the chimney
Horizontal terminal